A kitchen faucet is something that is used regularly if you are in a kitchen as it helps in keeping the kitchen neat and tidy and if it starts leaking or gets corroded then maximum work is left undone.
To repair this, a plumber would take lots of money that’s why nowadays people are more into DIYs. Repairing a faucet is very easy if you have a basin wrench in your toolbox, but not all people have this tool with them.
So, here is a guide to help you out if you don’t have a basin wrench at home and want to fix your faucet immediately.
Read also: How to Remove Flow Restrictor From Kitchen Faucet
What is a Basin Wrench?
Basin wrench is a plumbing tool that is designed for faucet installation and removal with its long shafts with a pair of asymmetric jaws at one end and traversal handle at the other.
How to Remove Kitchen Faucet Without Basin Wrench?
Not every home toolkit has a basin wrench and not every person is so trained to use it.
But removing a kitchen faucet is very easy as it is all about removing nuts that hold everything together and the process depends upon retaining the nuts off and not to the faucet.
What do you Need?
You will require the following tools before starting the work:
- Adjustable wrench
- Screw Driver
- Socket wrenches
- Gauging tape
- Towel or a clean cloth
- Grease
- Knife
How is it Done?
The process of removing the faucet is very easy, just follow the steps carefully.
Step 1: Turn Off the Water Supply & Valves to the Faucet
Before starting the process close the valves of both hot and cold water so that you don’t accidentally cause a flood in your kitchen.
Generally, these valves are installed below the kitchen sink and you can easily locate them.
It is advised to keep the bucket under the sink so that if there is any leftover water in the pipe it may drop in the bucket to save you from any mess.
In case your water valve is jammed then use some grease or oil to smoothen it.
Step 2: Release Air Pressure From the Faucet
After the water valve has been closed then there is always some air pressure left in the pipe and it creates an issue while you are working on your faucet.
So it is better to open the spigot and leave for a minute or two to let the air pressure release easily.
Doing so makes the faucet light enough for removal.
Step 3: Disconnecting Water Lines
There are always two water lines that lead to your kitchen faucet, it doesn’t matter that you have one faucet or two there are always two water lines one for cold water and another one for hot water.
Take an adjustable wrench to remove the water line properly and carefully and if you will not pay attention then you might break which will require a professional plumber to fix it.
While you disconnect make sure to block the sink with a clean cloth.
Step 4: Removing Nuts
Mineral deposits and corrosion leads to jamming of nuts so before removing the nuts first check whether your faucet is new or an old one.
If it is an old one then first apply some grease and oil on it and let it sit there for about 20 minutes.
Use a socket wrench to remove the nuts and if your faucet has screws then use a screwdriver.
Learn more about: What Is the Effect of Oven Cleaner on Kitchen Countertops
Step 5: Removing the Hose
After removing the screws and nuts and closing the pipelines now it is safe to detach the hose from the faucet.
The most important thing while doing this is that you carefully place the screws and nuts in the clear and visible place and make sure that no one touches them as they may be used to reinstall the faucet.
Even if you are installing the new faucet sometimes these old nuts and screws come to your rescue.
With this, you have finished removing the faucet without a basin wrench.
Final Thoughts
Hope this article is helpful for you and next time the faucet starts misbehaving with you then you don’t have to find a plumber or a basin wrench to correct it. Follow the steps given above to make this task simple, easy, and stress-free.
